CEL FI RS2 Multi-Carrier Cellular Indoor Coverage
CEL FI RS2 Multi-Carrier Cellular Indoor Coverage
CEL FI RS2 Multi-Carrier Cellular Indoor Coverage Repeater by Nextivity.

Single Band. Runs on the Telstra Next G 850MHz bandwidth in Australia and is exclusive to Telstra customers and partners. This is a Telstra approved and authorised product.

The Next Generation...
Nextivity’s second generation Cel Fi RS-2 is a cost- effective and intelligent Indoor Coverage Solution
for WCDMA/HSPA+, designed to dramatically increase indoor voice quality and data throughput for
3G consumers while significantly improving network capacity for Mobile Operators, Small Businesses and MVNOs. Breakthrough, patented technology enables a wireless, indoor, plug-and-play, user installable
coverage solution that’s so “no-touch” easy to use it obviates the need for support calls to the Operator’s Help Desk.

Benefit to Consumers.
* Improved Voice Coverage: Enables clear and reliable 3G voice connections within the
coverage area — usually up to 1235 m2 (13,000 Sq. Ft.).
* Improved Data Throughput: For indoor areas with poor reception, Cel-Fi offers significant
data throughput improvements — often in excess of four times the current rate!
* Improved Battery Life: Cel-Fi manages the power levels between the cell tower and
user devices so that subscriber devices enjoy significant improvements in battery life.
* Ease of Installation: Cel-Fi is a true “Plug and Play” system that doesn’t require the
installation of external antennas, bulky coaxial cables or a configuration set-up by the
subscriber. In fact, Cel-Fi intelligently and automatically senses and adapts to its environment
— including changes made by the Operator or those caused by nearby user equipment like WiFi, or other Cel-Fi devices.

Benefit to Operators.
* Reduced Churn:
Fewer dropped calls and higher data rates help ensure customer retention.
* Higher Data Service Usage:
By supporting advanced multi-carrier features, the second generation Cel-Fi system ensures that customers can maximize their data rates.
* Decreased Operational Cost:
Lowers cost of indoor coverage and increases capacity of 3G networks.
* Network Safe:
Cel-Fi’s embedded System-On-a-Chip technology provides real-time and automatic end-to-end gain control, thus guaranteeing it will complement the existing macro network’s capabilities.
* Operator Specific:
Cel-Fi’s On-Board IntelliBoost processor securely manages the enhanced services only for the Operator who authorized the system.
* Self Adjusting:
Cel-Fi automatically selects the correct frequencies for use based on UARFCN and Operator PLMNID codes, thereby eliminating additional and costly Operator provisioning efforts.
* Multi Carrier Support:
The Cel-Fi RS2 system supports multiple carriers (up to three simultaneous).

Cel-Fi Features:
• Fully wireless, plug-and-play architecture for supporting band I, IV, and V—WCDMA/HSPA+ with up to 100dB of system gain.
• Patented 2-unit, 3-hop system allows flexible placement for optimal coverage.
• Processor running advanced digital echo cancellation and channel select filtering algorithm.
• Software-based optimization of integrated antenna coverage pattern which maximizes system gain and provides improved coverage and signal quality.
• Automatic Gain Control (AGC) continuously monitors system path loss and transmit power to deliver maximum gain.
• Intuitive LED User Interface (UI) allows quick and easy installation by end-user.

Network-Safe Features:
• Securely provisioned operation with ciphered software which only operates on authorized Operator’s network.
• Network-Safe software prevents uplink system gain from exceeding path loss, and eliminates unnecessary rise in base station noise level.
• Uplink Muting Mode automatically shuts down uplink cellular transmissions when no active user equipment is detected.
• Embedded software ensures optimal performance and prevents out-of-specification operation.
• System shuts down upon Operator’s network command or failure detection.
• Maintains end-to-end cellular communication encryption without additional risk of vulnerability.
• Peaceful coexistence with adjacent Cel-Fi systems, 802.11a/b/g/n, cellular, and femtocell devices.

• Nextivity’s IntelliBoost Baseband Processor II

High-Level Specifications:
• Support for 3GPP Rel. 8 features
• 5 GHz link compliant with ETSI EN301 893 V1.5.1
• Up to 100dB path loss between units (approx. 20 meters between WU and CU)
• Max EIRP: 14.7 dBm (max 3 carriers) downlink & 24.7dBm (max three carriers) uplink
• Up to 100 dB system gain
• Availability greater than 99.9%


207MM (8.14”)H
144MM (5.66”)W
144MM (5.66”)D
Weight: 0.9kg (2lbs.)

151MM (5.94”)H
149MM (5.86”)W
49MM (1.92”)D
Weight: 0.34kg (.75lbs.)

• Operating temperature: 0° to 40°C
• Storage temperature: -25° to 60°C
• Relative humidity: 5 to 95%, noncondensing
• Operating altitude: -60m to 3,050m
• Storage altitude: 12,000m
• RoHS (2002/95/EC) six of six compliant
• WEEE (2002/96/EC)

• 3GPP TS 25.143 Rel.8

• EN 60950-1:2006 +A11:2009 +A1:2010
• EN 62311:2008 1999/519/EC EMF

• EN55022 Class B
• EN61000-3-2, 3
• EN61000-4-2~6,11
• EN 301 489 -1,17, 23
• EN 301 893 V1.5.1
• EN 301 908-1,11

• 12 VDC via external supply (2 included)
• External supply: 100 to 240 VAC, 47 – 63 Hz.
• Power consumption less than 12W per unit

• CE Mark
• CB Mark


U.S. Headquarters: Nextivity Inc.
12230 World Trade Drive, Suite 250
San Diego, CA 92128, USA
+1 858.485.9442 tel
+1 858.485.9445 fax

United Kingdom
Regus Building
Windmill Hill Business Park
Swindon, UK, SN5 6QR

Copyright © 2012 by Nextivity, Inc, U.S. Patents pending. All rights reserved. The Nextivity logo is a registered trademark of Nextivity Inc.
Recommended Retail Price $1060.00
Our Price $1040.00

Add to cart

© Copyright 2015 Yaqum Pty Ltd ABN 71 622 751 774. All rights reserved. Web Design Perth | SEO Perth